304L stainless steel coil for corrosion-resistant fabrication and export programs where low-carbon weldability matters. Confirm finish, thickness, width, coil weight, and MTC before quotation with Tsingshan Steel (Shandong).
| Property | Value |
|---|---|
| Product form | Stainless steel coil |
| Grade | 304L |
| Standards | ASTM A240 / EN 10088 |
| Thickness | 0.3–6.0 mm typical (confirm) |
| Surface finish | 2B / BA / No.4 as required |
| Documents | MTC EN 10204 3.1 with heat traceability |
| Export packing | Seaworthy coil packing with moisture barrier |
304L Stainless Steel Coil is widely used for formed parts, equipment skins, and welded assemblies that need general corrosion resistance without chloride-critical alloy cost. Align ASTM A240 / EN 10088, thickness × width, 2B/BA/No.4 finish, edge condition, and EN 10204 3.1 heat identity before container loading. For coastal or chemical chloride service, evaluate 316L rather than forcing 304L into the wrong duty.
RFQ documents & delivery
Packing, MTC, and inspection path — include them in your RFQ for an actionable quote.
Export seaworthy packing with traceable bundle labels and loading photos.
Mill certificate, inspection support, and shipment documentation can be coordinated before loading as ordered.
Supply confidence
Fixed delivery proof plus this product’s applications — confirm stock, inspection, and end use before RFQ.
Strapped coils and plates staged by lot so grade, thickness, and destination port can be matched quickly for shipment.
Overseas buyers and third-party inspectors are welcome to verify specs, heat numbers, and packing. SGS/BV support available.
Typical uses for this product: Formed components; Kitchen and equipment fabrication; General industrial skins. Share your end use, environment, and packing needs in the RFQ.
FAQ
Confirm grade 304L or acceptable alternate, surface finish, thickness, width, edge, coil weight limits, quantity, destination port, packing/protection method, and whether EN 10204 3.1 MTC or third-party inspection is required.
304L has lower carbon content and is commonly preferred for welded fabrication to reduce risk of intergranular corrosion in the heat-affected zone. 304 may still be acceptable for non-critical welded or non-welded parts. Share weld process and service environment for a practical recommendation.
We can coordinate mill test certificates (typically EN 10204 3.1), packing lists, commercial invoice support, heat or coil identification, loading photos, and optional SGS, BV, or Intertek inspection before shipment.
Related products
Continue with sibling coated families — not thin near-duplicate SKUs.
Product family
Browse more products in the Stainless Steel product library, or send this product as a quote preset.
Request Technical Quote
Send grade, size, quantity, and destination port for a practical export quotation.
